Don't have an account? Join Now

Please enter your public display name and a secure password.

Plan to post in the forums? Change your default forum handle here!

For Episode 4 of In The Garage, you'll learn that adjusting shifting isn't actually black magic. Max Ritter photo.

A noisy bike is a bike that isn’t performing as well as it could be, and you don’t have to be a World Cup racer to appreciate a bike that works. If you’re anything like me, hearing sounds that aren’t your hub or tires on dirt while you’re riding make you nervous. A common culprit is your drivetrain, and there’s a few reasons why your shifting might not be feeling as crisp as it did when your bike was brand new. Good thing is, it’s usually a simple fix.

RELATED: What's The Deal With Tire Inserts?

For Episode 4 of In the Garage, I’ll walk you through how to set up the drivetrain on your mountain bike. You’ll need a few tools depending on what exact model of derailleur you own, including a small Philips head screwdriver, or an appropriately-sized allen key (2mm, 2.5mm, or 3mm keys are common).

Before we begin, let’s make it clear what everything on that drivetrain is, and how it all works. By pushing the lever on your handlebar-mounted shifter, you are adding tension to a cable that runs to your derailleur, moving it and your chain up and down the cassette. On most modern drivetrains, adding tension brings your chain up the cassette into an easier gear.

All those things on your bike have names! Max Ritter photo.

Derailleur: The derailleur is the device attached to the back of your frame that physically moves the chain over the cassette. It is made of an arm that holds two pulley wheels that guide your chain.

Derailleur Hanger: The derailleur hanger is the small piece of metal that attaches your derailleur to your frame. It is designed to break in a crash, sparing your frame or derailleur from damage.

Cranks: What turns the front chainring and transfers power from your legs to your bike as you pedal.

Chainring: The chainring at the front of your drivetrain, most 1x drivetrains use a special chainring with alternating narrow/wide teeth. Comes in different sizes.

Cassette: The set of cogs attached to your rear wheel that change the difficulty of pedaling.

Shifter: The unit attached to your handlebars that sets the tension of the shifter cable.

Cable and Housing: A shifting cable runs through rubberized housing along the length of your frame and adds or removes tension from the derailleur, telling it what position to be in.

Limit screws: Your derailleur has a high and low limit to its range of motion, preventing the chain from moving too far up or down the cassette.

B-tension screw: B-tension adjusts the gap of your derailleur’s upper pulley wheel vertically from the cassette.

Barrel Adjuster: The barrel adjuster, typically found on your handlebar-mounted shifter, fine-tunes the tension of your shifter cable,

Where’s that sound coming from? As we talked about in episode 1, if you’ve been riding your bike for a while, it’s likely that you’ve lost some tension in your shifting cable, or your chain or cassette is starting to wear. Alternatively, a crash or improper storage might have bent your derailleur or hanger. So hop behind your bike and sight directly down the chain line to see how things are lining up.

Here, it's that the derailleur is slightly bent from my less-than-stellar riding, but the upper pulley still lines up for crisp shifting. Max Ritter photo.

Shift into a middle gear, and your upper pulley wheel should be in a perfect vertical line to whatever cog your chain is sitting on. If that’s not the case, use the barrel adjuster to add or remove tension to get it just right. We’re talking fractions of an inch here, but precision is key.

If this isn’t solving the problem, it might be time to start from scratch, so read on how to set it up fresh.

1. Complete release the tension in your shifter by turning the cranks and shifting into your hardest gear (smallest cog at the back). Then undo the bolt on your derailleur that’s holding the shifter cable in place so it can move freely.

2. Screw the barrel adjuster on your handlebar-mounted shifter all the way in, then back it out 1 full turn.

The barrel adjuster on your shifter can be your best friend. Max Ritter photo.

3. Sighting your derailleur from the back, set your LOW limit. Identify which screw is which on your derailleur (they are typically labeled L and H). Turn the low limit screw in far enough that the upper pulley wheel sits directly below your smallest cog.

Proper shifting is all about lining things up correctly. Max Ritter photo.

4. Pull the end of the shifter cable tight with your hand (just enough to take up any slack, but not so tight you are stretching it). While holding it tight, feed it through the clamp bolt and tighten the cable to the derailleur.

5. Turn the pedals and slowly shift all the way up the cassette into your easiest gear (biggest cog). Be careful, as the chain might jump over the biggest cog into your spokes, so the key is to shift slowly.

The position of these screws varies depending on your derailleur brand, but they all function the same. Max Ritter photo.

6. Sighting your derailleur from the back, set your HIGH limit. Identify which screw is which on your derailleur (they are typically labeled L and H). Turn the high limit screw in far enough that the upper pulley wheel sits directly below your biggest cog.

7. Identify the B-tension screw on your derailleur, and crank it in or out to give a 3-5mm vertical gap between the biggest cog and the upper pulley wheel. Some derailleurs, including modern wide-range 12-speed units are particularly sensitive to this adjustment, so shift up and down while slightly turning the B-tension screw in or out to see what feels best. SRAM makes a tool for their Eagle derailleurs to properly set this adjustment.

Measure that B-tension gap with your chain in the highest gear. Max Ritter photo.

8. Turn the cranks and shift and through your gears a few times to double-check that your indexing lines up, and use the barrel adjuster on your shifter to fine-tune cable tension.

9. Lube your chain, and go out and ride!

Canyon Bicycles has announced that US-based investments firms LRMR Ventures and SC Holdings have bought into a strategic equity investment in the German bike manufacturer. LRMR Ventures is owned by global basketball icon Lebron James and sports executive Maverick Carter. James has long shown an interest in the power of bikes, including riding his bike to games in 2012, taking a minority stake in Cannondale in 2007, creating King for Kid's Bike-a-Thon in 2008, and promoting cycling with the

Summer bike park laps are all about fun, and being comfortable and safe ensures that. | Max Ritter photo. In our book, summertime is all about having fun – and one of the best places to do that is at the bike park. Whether it’s chill jump laps at Jackson Hole Mountain Resort, racing the clock at Grand Targhee, or exploring any of the other fantastic bike parks around the Mountain West, having the right kit is crucial for a day of riding lifts. This summer, we came up with a favorite kit

Jaxson Riddle flying high at Rampage 2021. | Red Bull photo. With the end of summer creeping closer, that only means one thing for freeride mountain biking – Red Bull Rampage is right around the corner. 18 athletes were officially named by Red Bull as part of the competition scheduled for October 21 in Virgin, Utah. Last year’s top 10 riders automatically prequalified for this year’s event, with eight wildcards and five alternates also joining the mix this year. Here’s the full list of

Teton Gravity Research © 2017 All rights reserved. | Terms of Use & Privacy Policy | Partner of USATODAY Lifestyle/Action Sports