Brass Faucet Body Low Pressure Die Casting Machine

In low pressure casting process molten metal is filled directly from the holding or casting furnace into the dies and sand mould from below, with low turbulence and an absolutely controlled filled casting process.Low pressure die casting machines for brass for the casting of sanitary fittings, faucets, water meter or valve bodie

Featured Products

In low pressure casting process molten metal is filled directly from the holding or casting furnace into the dies and sand mould from below, with low turbulence and an absolutely controlled filled casting process.

Low pressure die casting machines for brass for the casting of sanitary fittings, faucets, water meter or valve bodies.

To fulfill the different capacity requirements, a full range of machines with one or two manipulators and one, two or three riser tubes can be supplied. We deliver the machines with freely programmable Siemens control.

I.
ADVANTAGES
1.Cost-efficient production
1.1.Multiple cavity dies
1.2.Reduced melting loss
1.3.Increased yield (less circulating material)
1.4.One-man operation
1.5.Cost savings in subsequent stages of manufacture
1.6.For robotic grinding low pressure die casting is a must
 
II.Humanization of the workstation
2.1.Ergonomic design of the workstation
2.2.Minimizing of smoke, heat, noise and danger of accidents

III.High quality castings and high-precision repeatability
3.1 Automated casting
3.2 Oxide inclusions in the casting are prevented by feeding metal from inside the melt through the riser tube

IV.TECHNICAL PARAETERS

 
CodeBASIC EQUIPMENTItemsParameters
1 Equipment Size: L*W*H5200*5000*3500mm
2Total Weight13T
3Total power125KW
4Voltage380V
5Casting dieMax. Die Dimensions  500*400*240mm
6Max. Die Thickness   2*120mm
7Max. Die Opening stroke370mm
8Max. Die Weight      180KG
9Max. force of die closing2400KG
10Max. force of ejector  500KG
11Max. die ejector stroke48mm
12Furnace   Melting rate           420KG/H
13Capacity             1800KG
14Inductors            3*35KW
15HydraulicMotor Power   7.5KW
16Rated pressure       8Mpa
17Hydraulic fluid temperature         ≤52 ºC
18Cooling system    Water PH Value7~8.5
19Pressure 3-5bar
20Temp. 20±2 ºC
21Flow ≥400L/Min   ≤600L/Min
22Air pressure  Compressed air pressure0.5-0.6Mpa
23Compressed air consumption 15 /H
24GasPressure   0.5 bar
25Flow 0.225 m3

V. Local show 
Brass Faucet Body Low Pressure Die Casting MachineBrass Faucet Body Low Pressure Die Casting MachineBrass Faucet Body Low Pressure Die Casting MachineBrass Faucet Body Low Pressure Die Casting Machine
Our Service
1. Before payment
a. We will provide our best professional for the most suitable machine.
b. Free professional design for each customer especially. Support sample testing.
c. Welcome to visit our factory.
2. After-Sales Service
a. After sending,we will track the polishing machine for you once every two days, until you get the products. When you got the goods, test them, and give me a feedback.If you have any questions about the problem, contact with us, we will offer the solve way for you.
b. We also can provide engineers / technicians to buyer's factory if client requirement, train the machine works well, and also supply the technical support for free and spare parts at good price always.
3. Guarantee Period
1 year. During the guarantee period, the seller guarantee to solve all problems may occur due to machine's quality or wrong design, and to provide all necessary spare parts for repair, Seller can send the technician to buyer's factory on seller's account if problem is serious and can't be solved by Buyer.
4. Payment Terms
T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.
5. Lead Time
Our delivery time generally it is 30-40 days if the machines are in stock, or it is 70-90 days if the machines are not in stock, it is according to quantity.

FAQ
Q1. Where is your factory located ? How can I visit it ?
A : Our factory is located in Xiamen city,Fujian province,China. You can fly to Jinjiang or Xiamen air port, we will pick you up.
Q2. Are you produce polishing machine's specific parameters according to the samples?
A: Yes, we produce the machine you want by your samples or technical drawings. Usually one machine have different molds and fixtures like metal polishing machine,die casting machine.
Q3. What is your sample service?
A: We can supply the sample testing which client want to produce if we have ready machine in stock, but the customers have to pay the sample shipping cost.
Q4. What is your MOQ of your machine?
A: Normally our MOQ is 1 set.
Q5. Do you test all your machine before delivery?
A: Yes, we have 100% test before delivery.
Q6: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
Brass Faucet Body Low Pressure Die Casting MachineBrass Faucet Body Low Pressure Die Casting MachineBrass Faucet Body Low Pressure Die Casting Machine

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours